Careful fitting, room by room
Fitting starts with the room being right: walls checked and made good, the floor prepared, and services in the correct position before the first unit goes in. Cabinets are levelled and fixed so runs are true, doors and drawers are aligned, and fillers and panels are used where walls are out rather than forcing units against them.
Worktops are templated for the actual installation, with cut-outs for sinks and hobs made accurately and edges finished properly. Appliances are installed and connected, and everything is tested and adjusted before we finish.
Supply and fit, or fitting only
Most of our customers choose a kitchen from our collection and have us supply and fit it, which keeps responsibility for the finished result in one place. If you have already purchased a kitchen elsewhere, talk to us about fitting it: we will be upfront about what we can work with and what we would need to check first.
The finishing that makes the difference
The last few days decide how a kitchen feels. Skirting and architraves, splashbacks and sealing, touching in paint after the units go in, and a proper clean before handover. We treat that as part of the job, not an extra.
What the work covers
- Levelling and fixing base and wall units
- Door, drawer and handle alignment
- Worktop templating, cutting and installation
- Sink, tap and appliance installation and connection
- Extractor and hob installation
- Splashback and upstand fitting
- Skirting, architrave and panel work
- Final sealing, touching in and clean-down
Worth thinking about before you start
- Walls and floors in older Dublin homes are often out of level; allow for packing and scribing rather than assuming a straight run.
- Confirm appliance dimensions and ventilation requirements before the units are ordered.
- Decide on handles, upstands and splashbacks early, as they affect the fitting sequence.
- If you are keeping any existing appliance or unit, tell us before measuring so it can be worked in.
How the project works
- Step 1
Get in touch
Call, email or send the enquiry form with a short description of what you are planning. We will ask a few questions to understand the project.
- Step 2
Visit and measure
We call out, measure the space properly and look at what is behind the walls and under the floor, so the plan is based on the actual room.
- Step 3
Free tailored quotation
You receive a quotation based on the work agreed, the specification chosen and the condition of the space. No obligation, and no pressure.
- Step 4
Work and handover
We agree a programme, carry out the work in sequence and check the finished result with you before we finish up.
Why choose Ruach Kitchens
- Over 20 years of experience in kitchens, bathrooms and building work
- One coordinated team instead of separate trades
- Free, tailored quotations based on your actual room
Where we work
We carry out this work across Dublin City and County Dublin. Our base is at Bunratty Road in Coolock, on the northside, and we travel throughout the city and county for projects.
Frequently asked questions
Can you fit a kitchen I bought from another supplier?
Sometimes. It depends on the units, the accuracy of the plan and what is already on site. Send us the details and we will tell you honestly whether we can take it on.
Do you fit worktops as well as units?
Yes. Worktops are templated for your installation and fitted with the sink, hob and tap cut-outs made to suit the appliances you have chosen.
Will the electrical and plumbing connections be done as part of the fitting?
Yes, where the work is part of the installation. Additional sockets, appliance connections, sink and dishwasher plumbing are coordinated with the fitting rather than left for someone else to come back to.