Full rewiring as part of a renovation
In older Dublin houses, the existing wiring is often decades old, with too few sockets, outdated consumer units and circuits that were never designed for modern appliances. Where the house is being renovated anyway, rewiring is the moment to do it properly: new circuits, new consumer unit, and sockets and lighting planned around how the rooms will actually be used.
We carry out the first fix as part of the building programme, before plastering, and return for second fix once the surfaces are finished. That sequencing is what keeps the walls intact.
Planning sockets and lighting
It sounds trivial and it is not. Where the sockets go decides where furniture can stand; where the light switches go decides how you walk into a room. We walk the plan with you room by room, including the less obvious positions: bedside, under-unit kitchen lighting, outdoor sockets, and provision for appliances that will be added later.
Working with the rest of the project
Electrical work is carried out by our electrical team as part of the wider project. Where your project requires certification or sign-off by a registered contractor, that is arranged for the works in question; we will be clear with you about what applies to your job.
What the work covers
- Full house rewiring during renovation
- Consumer unit replacement
- Additional sockets and circuits
- Kitchen appliance and under-unit lighting circuits
- Bathroom lighting, shaver points and extractor fans
- Internal and external lighting
- Smoke and heat alarm provision
- Making good after first and second fix
Worth thinking about before you start
- Decide socket, switch and lighting positions before first fix; changes afterwards are disruptive.
- Rewiring is far cheaper done alongside other work than on its own.
- Plan for appliances and heating controls you may add later.
- Ask in advance what certification your project will require and who provides it.
How the project works
- Step 1
Get in touch
Call, email or send the enquiry form with a short description of what you are planning. We will ask a few questions to understand the project.
- Step 2
Visit and measure
We call out, measure the space properly and look at what is behind the walls and under the floor, so the plan is based on the actual room.
- Step 3
Free tailored quotation
You receive a quotation based on the work agreed, the specification chosen and the condition of the space. No obligation, and no pressure.
- Step 4
Work and handover
We agree a programme, carry out the work in sequence and check the finished result with you before we finish up.
Why choose Ruach Kitchens
- Over 20 years of experience in kitchens, bathrooms and building work
- One coordinated team instead of separate trades
- Free, tailored quotations based on your actual room
Where we work
We carry out this work across Dublin City and County Dublin. Our base is at Bunratty Road in Coolock, on the northside, and we travel throughout the city and county for projects.
Frequently asked questions
How do I know if my house needs rewiring?
Common signs are an old fuse board, sockets in short supply, frequent tripping, and wiring that has been extended repeatedly over the years. During a survey we can tell you what condition the installation is in.
Can rewiring be done without damaging the walls?
Chasing is normally needed to run new cables. Where the house is being plastered and decorated anyway, that work is absorbed into the renovation. In a finished house it means making good afterwards.
Can you fit extra sockets without a full rewire?
Often yes, if the existing circuits can take it. We will check the installation before adding to it.